Dee (Florida) on 07/18/2024

2 Methods

How do I mix the methylene blue solution.
The methylene Blue solution I received from Valboren Labs in Florida is in a concentrated liquid form. This should be mixed with distilled or deionized water using the recommended dosing. Dosages between 0.5 milligram per kilogram of bodyweight to 4 mg per kg. As mentioned, methylene blue is a hormetic, so low dosages have the opposite effect of high dosages. Adding 1/16th teaspoon of Ascorbic Acid to the prepared solution will facilitate better absorption and reduce the blue staining potential. After the Ascorbic Acid is added to the solution let it sit for a minimum of 3 hours before taking. With methylene blue less is more. Higher doses are not as effective a low doses (hormetic response). Dosage recommendation varies; Dr. John Lieurance suggests 0.5-1mg/kg of body weigh, t 2 to 4 days a week, with 20 to 60mg daily being therapeutic for many. Do it slowly 2 or 3 drops to start 3 times a week, and work you way up .
or

Method #2

1-2 drops am in distilled water with 1/16 tsp. of Ascordic acid first 2 days.
Increase dose on third day by 2 drops for 2 days, Continue increasing
dosage by 1 drop every 2 days, until you reach 22 drop or more. Take 6 days
in a row and 7th day off. Note: Do not take Co10 with it.