Silvertron Elite Colloidal Silver Generators - Why No Longer Sold?

Posted By Darrin (Tampa, Florida ) on 05/24/2022

Hi, I've watch your videos about this machine in the past and found it very helpful. I wanted to make some more but I was curious as to what happened to the company and if the machine is still safe to use? Do you know anything about why the owner stopped producing the device and if it had anything to do with the machine itself? Any info on this would be great! Thank you!
REPLY         

Replied by Deirdre (Earth Clinic) on 05/25/2022

Hi Darrin,

Yes, I do know. The amazing owner/manufacturer of the Silvertron Elite colloidal silver generators had some health issues crop up a couple of summers back and has been unable to make the colloidal silver generators or run the Colloidal Gold Colloidal Silver forum that he founded in 2008 since then. Very unfortunate.

Absolutely nothing wrong with the machine. It should last you many years!

REPLY   3      

Replied by Art (California) on 05/25/2022

Darrin,

The machine is safe to use and very precise in its adjustability features. You can make batch sizes from 250 ml up to 4 liters or one cup up to one gallon by just inputting your desired batch size on the soft touch screen. With a different acrylic lid the batch sizes can be increased up to 5 gallons if needed. It can make a liter of 20 ppm yellow colloidal silver in about 30 minutes or clear and colorless ionic silver in about 25 minutes when running at 15 milliamps.

You can make 5 parts per million up to 320 parts per million or higher if needed just by selecting the desired ppm on the soft touch screen.

The current can be adjusted from 1 milliamp up to 15 milliamps and the current is electronically controlled to be very stable and is constantly viewable on the display.

The voltage can be adjusted in a functional operating range of 10 to 20 volts which shows constantly on the display. All adjustments are made via the soft touch screen.

It has an alarm to let you know when the batch is done and the current stops automatically when the batch is done to help insure the accuracy of the batch. There is a progress meter to show where the batch is at any point during the process. If you have to go somewhere in the middle of the batch, you can pause the unit and when you get back you can restart exactly where you stopped so your batch stays accurate to what you set the unit to make in the first place.

It is a shame that the designer of this unit can no longer make them because it is a very impressive unit compared to other silver generators on the market under $800 and I can say that it is very reliable and very easy to use after years of use.

Art

REPLY   4      

Back to Colloidal Silver Q&A